Partyline: Can I use an electrec headset on a RS-600 series beltpack?
Clear-Com RS-600 series beltpacks can accept both dynamic and electrec headsets for both the main 4-pin XLR headset connector and the auxilliary 2.5mm headset connector.
The beltpacks need to be connected to V-Pack software and the correct headset type can be selected via the V-Pack software while the beltpack is powered and connected in "on-line" mode.
The beltpacks are not auto sensing regards headset microphone type.
The beltpacks need to be connected to V-Pack software and the correct headset type can be selected via the V-Pack software while the beltpack is powered and connected in "on-line" mode.
The beltpacks are not auto sensing regards headset microphone type.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.