/
Matrix: How do I program the V series panel GPI 1 and 2 (logic) inputs

Matrix: How do I program the V series panel GPI 1 and 2 (logic) inputs

Apr 06, 2019

In ECS matrix hardware > advance setting screen for V-panels, If I select logic input 1 andselect ‘route’ I get a menu. If I select a control then I assume I can triggerthat control from that panel GPI input relay. What is the difference between the red andgreen section in this menu? I seem to be able to assign one function to either(or both by holding shift) but I can’t tell the difference.
This screen follows layout of the normal Panel programming screen in ECS Thereforeyou could assign a control to Logic-1 or you could just as easily assign a talkor listen to the label to the logic 1 input. (we treat the logic input like a virtualpanel key) I recommend that you use the RED talk assignment labels. Note:if you go deep into the system, (using the attachments screen in ECS) certainrelays can be set so that they only fire if the panel key is set to talk only or listen only. 
































CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.