Customer stated that they use a Drake MICROCOMPACT System with PD8800 Matrix. They lost the PC with config software (CCF v 3.0) for that system and there is a request to get that software again. Please advise.
If you have lost your CCF configuration programme for your Drake Microcompact matrix , Then you can use cmapsi to re-configure the matrix (please contact Tech Support for a copy of cmapsi)Using the GPSF section of cmapsi you can programme the keys for the panels. Hence GPSF card 1701  = panel 1 key 1 GPSF card 1732  = panel 1 key 32GPSF card 1801  = panel 2 key 1 GPSF card 1832  = panel 2 key 32etc..Attached is the CCF programming manual, see page 59-60 for instructions on how to programme Microcompact system.
Note: To download the map you need to change the settings for cmapsi Go to c:\windows and edit the adpmain.ini file , change the settings to match , then save the file
[Download]Compression=0 ;0 = OFF, 1 = ON (default for Drake 4000 matrix)Fast=0 ;0 = OFF, 1 = ON  (default) - Set to 0 to enable the serial download retry mechanismOutputToFile=0 ;0 = OFF, 1 = ON  - output file = current.out in current dirMapLength=0 ;0 = 60, 1 = 220 (default)