Other: How can i configure my Drake MicroCompact matrix
Customer stated that they use a Drake MICROCOMPACT System with PD8800 Matrix. They lost the PC with config software (CCF v 3.0) for that system and there is a request to get that software again. Please advise.
If you have lost your CCF configuration programme for your Drake Microcompact matrix , Then you can use cmapsi to re-configure the matrix (please contact Tech Support for a copy of cmapsi)Using the GPSF section of cmapsi you can programme the keys for the panels. Hence GPSF card 1701 = panel 1 key 1 GPSF card 1732 = panel 1 key 32GPSF card 1801 = panel 2 key 1 GPSF card 1832 = panel 2 key 32etc..Attached is the CCF programming manual, see page 59-60 for instructions on how to programme Microcompact system.
Note: To download the map you need to change the settings for cmapsi Go to c:\windows and edit the adpmain.ini file , change the settings to match , then save the file
[Download]Compression=0 ;0 = OFF, 1 = ON (default for Drake 4000 matrix)Fast=0 ;0 = OFF, 1 = ON (default) - Set to 0 to enable the serial download retry mechanismOutputToFile=0 ;0 = OFF, 1 = ON - output file = current.out in current dirMapLength=0 ;0 = 60, 1 = 220 (default)
If you have lost your CCF configuration programme for your Drake Microcompact matrix , Then you can use cmapsi to re-configure the matrix (please contact Tech Support for a copy of cmapsi)Using the GPSF section of cmapsi you can programme the keys for the panels. Hence GPSF card 1701 = panel 1 key 1 GPSF card 1732 = panel 1 key 32GPSF card 1801 = panel 2 key 1 GPSF card 1832 = panel 2 key 32etc..Attached is the CCF programming manual, see page 59-60 for instructions on how to programme Microcompact system.
Note: To download the map you need to change the settings for cmapsi Go to c:\windows and edit the adpmain.ini file , change the settings to match , then save the file
[Download]Compression=0 ;0 = OFF, 1 = ON (default for Drake 4000 matrix)Fast=0 ;0 = OFF, 1 = ON (default) - Set to 0 to enable the serial download retry mechanismOutputToFile=0 ;0 = OFF, 1 = ON - output file = current.out in current dirMapLength=0 ;0 = 60, 1 = 220 (default)
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.