/
Wireless: How do you select Hi band / Lo band or All (so that the DX is compatible with older belt packs?)
Wireless: How do you select Hi band / Lo band or All (so that the DX is compatible with older belt packs?)
By Administrator
Apr 06, 2019
On DX200s with the spectrum friendly firmware, how do you select Hiband / Lo band or all (so that the DX is compatible with older belt packs?)
See attached
1) Turn the basestation on; the status window will display 8 for a few seconds; the 8 disappears the status window will be blank
2) Press and hold the CLEAR/BAND button, and while you are still holding the CLEAR/BAND button, press and hold the REGISTER button
When the status window displays L, H or A. Release both buttons
3) Press the CLEAR/BAND button repeatedly to cycle through parts of the frequency bandL= low end, H= high end , A= all
Stop at the desired setting and wait until "c" appears on the status window display.
* note you will need to re-register any beltpacks
See attached
1) Turn the basestation on; the status window will display 8 for a few seconds; the 8 disappears the status window will be blank
2) Press and hold the CLEAR/BAND button, and while you are still holding the CLEAR/BAND button, press and hold the REGISTER button
When the status window displays L, H or A. Release both buttons
3) Press the CLEAR/BAND button repeatedly to cycle through parts of the frequency bandL= low end, H= high end , A= all
Stop at the desired setting and wait until "c" appears on the status window display.
* note you will need to re-register any beltpacks
, multiple selections available,
Related content
Wireless: DX100 Only 3 Beltpacks are working
Wireless: DX100 Only 3 Beltpacks are working
More like this
Wireless: Are DX210 beltpacks backward compatible with the older DX range
Wireless: Are DX210 beltpacks backward compatible with the older DX range
More like this
Wireless: Changing the WTR-670 Beltpack Group / Channel Frequency programming
Wireless: Changing the WTR-670 Beltpack Group / Channel Frequency programming
More like this
Wireless: What is the DX-210 ISO mode
Wireless: What is the DX-210 ISO mode
More like this
Wireless: DX210 base station low / high / full frequency band setup
Wireless: DX210 base station low / high / full frequency band setup
More like this
Wireless: How do I know if a DX410 system is EU frequency hopping capable?
Wireless: How do I know if a DX410 system is EU frequency hopping capable?
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.