/
Wireless: What is the DX-210 ISO mode

Wireless: What is the DX-210 ISO mode

Apr 06, 2019
Translate page

The DX210 base and its associated beltpacks have 3 modes of working 
Normal mode : ► Pressing the IC button on a wireless beltpack talks to all wireless beltpacks and outof the 2 or 4 wired connection►You can enable 4wire mode only or 2&4wire mode. ►Note audio is not passed from the 2wirecircuit to the 4wire circuit.► Pressing the ISO button on a wireless beltpack talks to all wireless beltpacks and notout of the 2 or 4 connector
Select ISO+ button on the basestation► Pressing the ISO button on a wireless beltpack talks to all wireless beltpacks and outof the AUX connector
Selecting ISO+ “Restricted broadcast” on the basestation via internaldip-switch► Pressing the ISO button on a wireless beltpack talks out of the AUX connectorand not to any wireless beltpacks nor the 2 /4 wire connector

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.