Wireless: WH-210 not sending audio to AUX OUT via the ISO Button (DX210, DX-210)
If you are trying to send a voice command over the ISO button to the AUX OUT on the DX210 base station make sure the AUX OUT is engaged, and the volume is turned up. Then on the headset, make sure it is registered to the base station. Then try to ENABLE the ISO key.
To ENABLE the ISO button turn off the headset. Press and hold the IC-1 and the ISO button, then press and release the power button. Once you hear the "Power ON" voice over prompt release the IC-1 and the ISO button. Wait a second then try pressing the ISO button to test the AUX OUT.
To ENABLE the ISO button turn off the headset. Press and hold the IC-1 and the ISO button, then press and release the power button. Once you hear the "Power ON" voice over prompt release the IC-1 and the ISO button. Wait a second then try pressing the ISO button to test the AUX OUT.
, multiple selections available, Use left or right arrow keys to navigate selected items
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.