/
Matrix: How do I setup a split ear feed to my V-series panel?
Matrix: How do I setup a split ear feed to my V-series panel?
By Administrator
Apr 06, 2019
To get split ear you need to arrange for the 2nd audiofeed into the panel either by fitting the AES-3 daughter card into panel and at the the matrix end using a AES-6 interface card or bring audio local directlyto the panel via the audio rear connector using the EXT1 or EXT 2 connections
Headset options Options are 1) order factory fitted XLR5 / XLR7 front mounted headset connector 2) use the rear 2nd headset option found on the rear of the Vpanel - as that provides the L+R pins for the headset
Remember to use the panel DSP mixer to route the audio tothe appropriate ear
Headset options Options are 1) order factory fitted XLR5 / XLR7 front mounted headset connector 2) use the rear 2nd headset option found on the rear of the Vpanel - as that provides the L+R pins for the headset
Remember to use the panel DSP mixer to route the audio tothe appropriate ear
, multiple selections available,
Related content
Matrix: How do I setup a V-Series panel to support a second headset via the auxillary audio connector?
Matrix: How do I setup a V-Series panel to support a second headset via the auxillary audio connector?
More like this
Matrix: How can I listen to two ports on a binaural headset steroscopicly on a v-panel
Matrix: How can I listen to two ports on a binaural headset steroscopicly on a v-panel
More like this
Matrix: How can I route 2 independent audio paths to a V-Series panel
Matrix: How can I route 2 independent audio paths to a V-Series panel
More like this
Matrix: How should I wire up Headset 2 (HS2) on the rear of a V-series panel
Matrix: How should I wire up Headset 2 (HS2) on the rear of a V-series panel
More like this
How to Route Additional Channels of Audio to IP-Connected V-series or V-Iris Panel
How to Route Additional Channels of Audio to IP-Connected V-series or V-Iris Panel
More like this
Matrix: Is it possible to send/receive 2 AES channels to a V-panel through an audio mixer?
Matrix: Is it possible to send/receive 2 AES channels to a V-panel through an audio mixer?
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.