/
Matrix: How do I get a TEL-14 to flash incoming call signal on my panel?

Matrix: How do I get a TEL-14 to flash incoming call signal on my panel?

Apr 06, 2019
Translate page

If you configure a Tel-14 port by default in-use tally and off-hook tally is set. this will flash the key on your panel ... but you will not hear any audio from the TEL-14 until you press a talk/listen for the TEL-14
If however you want an incoming call tally to appear on a specified panel then the user needs to configure a preset talk from the telephone port to the panel in the Local Advanced screen of ECS.This will create an active talk route from the telephone to your panel. You will hear the audio from the TEL-14 port straight away without having to press any keys.

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.