/
Partyline: Can I distribute a partyline through a patch panel?

Partyline: Can I distribute a partyline through a patch panel?

Apr 06, 2019
Translate page

I want to take a PL intercom chnl -A from my MS-702 and patch it to several points around the studio. So that any user connected into the patch will be connected to Chnl-A back to the MS-702
Answer: Yes. You will need to feed the partyline channel into one of the patch points as a master feed. From this you can then split the signal to the remaining panel points to be used by the belt packs or panels?
Clear-Com single channel pin outs are:
Pin 1- GroundPin 2- 30v DC PowerPin 3- Audio and Call Signal
You need to ensure that each patch point is connected to each pin for all to listen/talk and have call signal passed through.
Note: We strongly recommend that customers CLEARLY  MARK ANY PLPATCHPOINTS AS SUCH IN ANY PATCH BAY, BECAUSE THESE POINTS CARRY 30V DC VOLTAGE ! 

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.