/
Matrix: Do i get in-use tally or some sort of busy tally for TEL-14 unit connected on a remote matrix

Matrix: Do i get in-use tally or some sort of busy tally for TEL-14 unit connected on a remote matrix

Apr 06, 2019

I have two networked (linked) matrices and on system #1 I have a number of TEL-14 telephone hybrids. The panels on system  #2  have keys to talk / listen to the TEL-14 on system #1, however can the panels on system #2 see when the TEL-14 are off hook or busy  / in-use
Answer: Using ECs V5.1.3 And making sure the in- use tally and off hook tally on the TEL-14is set You get flashing signalisation on the remote system panels. 
Note: at ECS V5.1.3 there are some limitation when using remote TEL-14 units 
TEL-14 issues whennetworking:-         A panel user cannot go to the dial menu and release a call ifthe call started from another system.-         Inward DTMF is only available on a local frame. The user isunable to dial a route to another system. -         Dialling out using V-Series dial mode on remote TEL-14 (only via analogue trunk lines which have DTMF  encoders fitted)-         Off-hook tallies not appearing on remote systems But you can:-         Take a remote TEL-14 off-hook-         Use speed dials (configured on that remote system)

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.