/
Wireless: How to setup a Cellcom base recently returned from the factory

Wireless: How to setup a Cellcom base recently returned from the factory

Apr 06, 2019

When a Cellcom base is returned from factory it is possible that it isn't loaded with your configuration.
What you need to do in order to make it work again with your beltpacks is to download the configuration you previously had in the system, hopefully you'll have a copy saved on your PC.Once you download it there's no need to re-register the beltpacks.
You may need to do the following:- change the IP address on the base to match your network or change the IP on your PC  to match that on the base.- null the PL channels if you have a wired PL system connected to the wireless system by pushing an holding for 10 seconds the corresponding PL channel button on the front of the base

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.