Matrix: What’s the function behind “has associated relay”?
Question: What’s thefunction behind “has associated relay”?
Answer: If you set the port function to "Direct" then you will get the option in the global advance settings to enable "has associated relay"
Ifyou activate this function there will be a relay created in the GPO screen for this port.
Youcould use it for example to connect a FOR-22 to a mvx port, but in ECS declare the port as a "direct" with "associated relay"You can now separate the relay function of the FOR-22 away...allowing you to trigger the FOR-22 relay independently rather than the normal mode of FOR-22 which is for the relay to be activated whenever you talk to the FOR-22 port.
Example you have a number of FOR-22 units in your system but have run out of matrix frame relay GPOs , you can use one of your spare FOR-22 relays instead to fire RED lights, act as a trigger to mixer desk etc..
For more complex installations using the "associated relay" option , the installer can take the RS422 TX data pins directly from the MVX port and use that signal to trigger 3rd party logic circuit connected to the RS422 TX pins of that port.
Answer: If you set the port function to "Direct" then you will get the option in the global advance settings to enable "has associated relay"
Ifyou activate this function there will be a relay created in the GPO screen for this port.
Youcould use it for example to connect a FOR-22 to a mvx port, but in ECS declare the port as a "direct" with "associated relay"You can now separate the relay function of the FOR-22 away...allowing you to trigger the FOR-22 relay independently rather than the normal mode of FOR-22 which is for the relay to be activated whenever you talk to the FOR-22 port.
Example you have a number of FOR-22 units in your system but have run out of matrix frame relay GPOs , you can use one of your spare FOR-22 relays instead to fire RED lights, act as a trigger to mixer desk etc..
For more complex installations using the "associated relay" option , the installer can take the RS422 TX data pins directly from the MVX port and use that signal to trigger 3rd party logic circuit connected to the RS422 TX pins of that port.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.