Custom logoCustom icon
Clear-Com Solution Finder Home
Templates

Solution Finder

  • All content
  • Space settings
  • Clear-Com Main Website
    Clear-Com Main Website
     This trigger is hidden
  • Contact Clear-Com
    Contact Clear-Com
     This trigger is hidden
  • How-to articles
    How-to articles
     This trigger is hidden
  • Troubleshooting articles
    Troubleshooting articles
     This trigger is hidden
Results will update as you type.
  • Wireless: Need a call signal back to main wired PL station from a DX210 system.
  • Wireless: New BAT41 batteries not charging correctly.
  • wireless: New WBS 670/680 antenna spare parts 2013
  • Wireless: Number of FreeSpeak users in one location
  • Wireless: On a FreeSpeak basestation, can you use the two transceiver ports using a splitter in one and one antenna in second?
  • Wireless: On my FreeSpeak Beltpack the Vibration Call Alert Function is not working?
  • Wireless: One of our DX200 base stations has a 60 Hz hum when the front panel headset mic switch is engaged.
  • Wireless: Powering the E-IPT with USB-C
  • Wireless: Press ISO on the WH-210 is not sending audio to the AUX port on a DX210 basestation
  • Wireless: Problem upgrading CellCom/Freespeak basestation FPGA using Xlinix
  • Wireless: Q700 programing questions
  • Wireless: RaceTrack Coverage using Tempest (Audru ringrada)
  • Wireless: Replacement phoenix connectors for the MB300ES.
  • Wireless: Replacing existing UHF wireless intercom systems with Tempest is a great way to make room for more wireless microphones and/or wireless IFBs
  • Wireless: Simple partyline beltpack mode not supported on Cellcom base
  • Wireless: Since Tempest products were discontinued to sell by Clearcom, where can we purchase spare parts for Tempest?
  • Wireless: Slow/Delayed button response on FreeSpeak/CellCom beltpacks
  • Wireless: Spare WBS antenna parts list and antenna color code
  • Wireless: Spectrum Friendly Mode Info for DX series base stations.
  • Wireless: T-Desk not showing belt packs but it shows the base station
  • Wireless: T-LP1 / Tempest Belt Station Batteries Not Charging After Storage
  • Wireless: Tempest 3.0 Network Number Setting changes for multiple systems
  • Wireless: Tempest 900 Belt Pack In Searching Mode
  • Wireless: Tempest Antenna Flexibility
  • Wireless: Tempest Beltpacks go into searching mode while roaming
  • Wireless: Tempest and Beyer DT-280 or DT-290 headsets
  • Wireless: Tempest antenna placement
  • Wireless: Tempest base station has echo/delay on channel A, channel B sounds fine
  • Wireless: Tempest basestation Control Relays
  • Wireless: Tempest Battery Options
  • Wireless: Tempest battery T-LP1 Material safety data sheet (MSDS)
  • Wireless: Tempest Belt Pack In Searching Mode
  • Wireless: Tempest Belt Pack not registering and still says searching after pairing
  • Wireless: Tempest beltstation settings not saving when the belt station battery is low
  • Wireless: Tempest BP activates Global IFB on Eclipse Pico frame to Studio Talent via VOX activation
  • Wireless: Tempest does not require frequency coordination
  • Wireless: Tempest firmware is fast and easy to upgrade
  • Wireless: Tempest Lan IP settings not changing when I try to manually set them
  • Wireless: Tempest Range Superiority
  • Wireless: Tempest supports lots of users
  • Wireless: Tempest systems come with T-Desk software at no extra charge
  • Wireless: Tempest V2.0 features
  • Wireless: Tempest wireless intercom systems, intuitive to setup and use.
  • Wireless: Tempest wireless intercoms interfaces with all major 2-wire party-line intercom systems
  • Wireless: Tempest with patented frequency hopping spread spectrum radio technology plus 2xTX redundant audio data transmission
  • Wireless: Tempest works well right up to the end of range and then declines gracefully
  • Wireless: Tempest works with Wi-Fi
  • Wireless: There are two antennas inside the DX200 beltpacs. Can you tell me if they are polarized horizontal, vertical, circular or one of each horizontal and one vertical.
  • Wireless: Upgrading from CellCom / FreeSpeak I basestation to a FreeSpeak II basestation
  • Wireless: Using FSII BaseII can I get 2x GPIO to trigger Radio basestations
  • Wireless: Using the DX210 with an RTS Party Line System
  • Wireless: Using the DX410 with an RS703 and TWC701
  • Wireless: Using the DX410 with an RTS Partyline System
  • Wireless: VEGA U2020 user manuals
  • Wireless: WBS and WTR spare antenna part numbers 2014
  • Wireless: WBS-6 and WBS-600 user manuals
  • Wireless: WBS-680 Does the Auxiliary output XLR interface to both IC A and IC B?
  • Wireless: WBS-680 How many frequency groups are user programmable?
  • Wireless: WBS-680 Is the Auxiliary Input a Global input?
  • Wireless: WBS-680 Questions regarding WBS-680 rebanding
  • Wireless: WBS-680 What is the procedure to link two WBS-680 bases together?
  • Wireless: WBS-680 Why does the system go into feedback when I activate the talks on BPs?
  • Wireless: We have "click´s & pop´s" in our DX system, what could this be and what can we do about it?
  • Wireless: We have a client with an older DX200 base and 8 belt packs. They are interested in upgrading to spectrum friendly.
  • Wireless: We recently purchased a wireless package with a BS200. We have an existing Telex Audiocom 2-wire wired intercom. Are there any special considerations we need to make to connect the two?
  • Wireless: We want to integrate BS210 and WH220 for our floor director to communicate to the control room
  • Wireless: WH200 Headset Mic communication is barely audible on the other headsets. Even adjusting the volume control does not help.
  • Wireless: WH-210 not sending audio to AUX OUT via the ISO Button (DX210, DX-210)
  • Wireless: What algorithm is used to achieve the 64-bit encryption on the DX 100,121, 200, 210, and 300 wireless basestation?
  • Wireless: What applications would I use the DX-210 ISO+ mode
  • Wireless: What are the accessory jack pinouts for a Motorola Pacer Plus series radio to a TW-47 interface?
  • Wireless: What are the BP850 antenna part numbers?
  • Wireless: What are the factory programed WBS-680 Groups / Channel frequencies?
  • Wireless: What are the hopping specifications in TEMPEST wireless?
  • Wireless: What are the impedance values on the HME HS4-3 headset?
  • Wireless: What are the main differences between the FSII-Base (older generation) and the newer FSII-BaseII (FSII-Base2) ?
  • Wireless: What are the model #s for the WTR battery packs?
  • Wireless: What are the model numbers for obsolete Clear-Com wireless intercoms?
  • Wireless: What are the operational ranges of the WBS-670 and WBS-680 intercoms?
  • Wireless: What are the programming options for a BP300 Beltpack Communicator