/
Wireless: I can’t register my Beltpack to my FreeSpeak Basestation using the Config editor tool

Wireless: I can’t register my Beltpack to my FreeSpeak Basestation using the Config editor tool

Apr 06, 2019

If you are using a Win7 machine please set the Config Editor tool to run in XP mode.- Right button click on the Config editor tool (exe or folder) select compatibility and select to run in XP mode.
Make sure the serial comms port in the Config Editor is set to same as the USB comms port settings.- Connect the UBS/RS232 cable into your PC- Please go to device manager and click on the Com port settings, set the USB com port settings same as the com port settings you have set in the Config Editor.- When in device manager, select the COM port settings , then select the USB cable , select  Advanced setting that you can use to set the com port to something between Com port (1 – 4 )

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.