/
Wireless: My DX121 Series BS121 base came with a 4 pin XLR cable and phoenix connector.

Wireless: My DX121 Series BS121 base came with a 4 pin XLR cable and phoenix connector.

Apr 06, 2019

Q: My DX121 Series BS121 base came with a 4 pin XLR cable and phoenix connector assembly to use in the headset jack of my main station. The connector plugged into the 10 pin female port on the rear of the BS121 base. They came apart and I need to know what color wire from the XLR cable goes to what position on the male phoenix connector. I have the following colors: Black, Red, shield braid, and insulated copper. 
A: 
Here are the pin locations for the wire colors associated with the Clear Com cable assembly that you described.
1. black - speaker (-)2. red - speaker (+)3. shield braid - mic (-)4. insulated copper - mic (+)

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.