Wireless: Can I use a standard CAT-5 patch cable to connect a DX210 base to an Adam frame?
Question: I just purchased a DX210 wireless system and want to connect it to my RTS Adam frame via 4-wire to
a AIO-16 RJ45 port. Can I use a standard CAT-5 patch cable to make this connection?
Answer: You will need an audio crossover CAT-5 cable to make this connection. See wiring pin outs for DX210
4-wire port, RTS AIO-16 RJ45 port and audio crossover cable.
DX-210 base station 4-wire RJ45 connector pin outs:
RTS AIO-16 RJ45 connector pin outs:
CAT-5 Audio Crossover cable:
a AIO-16 RJ45 port. Can I use a standard CAT-5 patch cable to make this connection?
Answer: You will need an audio crossover CAT-5 cable to make this connection. See wiring pin outs for DX210
4-wire port, RTS AIO-16 RJ45 port and audio crossover cable.
DX-210 base station 4-wire RJ45 connector pin outs:
RTS AIO-16 RJ45 connector pin outs:
CAT-5 Audio Crossover cable:
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.