/
How do I connect my PC to the FSII Base-II?
How do I connect my PC to the FSII Base-II?
By Administrator
Apr 06, 2019
How do I connect my PC to FSII Base-II (not the "Classic" base with just one OLED window)?
Solution: Here are the steps how to connect the PC to FSII Base:
1) Make sure the Base Station is connected to a network (either LAN connector on back of device or directly connected to your computer).
2) Open a browser (PC,...on the same subnet as the base station's IP address and subnet mask... or with a wireless router, with the device connected to that WiFi. to your tablet, or mobile phone) and input the IP address of your Base Station in the URL field.
Find the IP address for the FSII Base in the front menu screens of your FSII Base: Menu/Networking/Preferences/IP address.
The default username is: admin.The default password is: admin.
This takes you to the Overview page of the CCM (User Interface) for your device.
Note: If you cannot access the CCM for your Base you may have an IP conflict. Check with your network administrator. Your device network settings are set to Dynamic Host Control Protocol (DHCP) by default.
Solution: Here are the steps how to connect the PC to FSII Base:
1) Make sure the Base Station is connected to a network (either LAN connector on back of device or directly connected to your computer).
2) Open a browser (PC,...on the same subnet as the base station's IP address and subnet mask... or with a wireless router, with the device connected to that WiFi. to your tablet, or mobile phone) and input the IP address of your Base Station in the URL field.
Find the IP address for the FSII Base in the front menu screens of your FSII Base: Menu/Networking/Preferences/IP address.
The default username is: admin.The default password is: admin.
This takes you to the Overview page of the CCM (User Interface) for your device.
Note: If you cannot access the CCM for your Base you may have an IP conflict. Check with your network administrator. Your device network settings are set to Dynamic Host Control Protocol (DHCP) by default.
, multiple selections available,
Related content
FSII-BASE-II Firmware Update Guide
FSII-BASE-II Firmware Update Guide
More like this
Wireless: How do I register a FS II beltpack OTA (Over The Air) to Eclipse HX frame with E-QUE card
Wireless: How do I register a FS II beltpack OTA (Over The Air) to Eclipse HX frame with E-QUE card
More like this
Matrix : How to set 2X10 touch screen desktop panel into IVC mode
Matrix : How to set 2X10 touch screen desktop panel into IVC mode
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.