/
HelixNet: Can I program IP address and DHCP functionality from the HMS-4X CCM web browser?

HelixNet: Can I program IP address and DHCP functionality from the HMS-4X CCM web browser?

With the release of HelixNet v3.0.0 firmware the built in web browser does not support changes to IP address, Subnet mask,
Gateway or DHCP / Static IP mode.
These changes must be initiated from the HMS-4X main station local menus. 
Note: All Helixnet devices should not be given an IP address  10.0.x.x (fixed IP or via DHCP) this can cause audio transmit and receive problems on the network as some of the 10.0.x.x addresses are reserved by some internal elements in the Helixnet digital domain

Related content

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT


This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..


The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.