HelixNet: Can I program IP address and DHCP functionality from the HMS-4X CCM web browser?
With the release of HelixNet v3.0.0 firmware the built in web browser does not support changes to IP address, Subnet mask,
Gateway or DHCP / Static IP mode.
These changes must be initiated from the HMS-4X main station local menus.
Note: All Helixnet devices should not be given an IP address 10.0.x.x (fixed IP or via DHCP) this can cause audio transmit and receive problems on the network as some of the 10.0.x.x addresses are reserved by some internal elements in the Helixnet digital domain
Gateway or DHCP / Static IP mode.
These changes must be initiated from the HMS-4X main station local menus.
Note: All Helixnet devices should not be given an IP address 10.0.x.x (fixed IP or via DHCP) this can cause audio transmit and receive problems on the network as some of the 10.0.x.x addresses are reserved by some internal elements in the Helixnet digital domain
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.