/
Helixnet: What is the HMS-4X base station screensaver activation timer set to?

Helixnet: What is the HMS-4X base station screensaver activation timer set to?

Apr 06, 2019

HMS-4X screensaver activation:
The HMS-4X screensaver features the channel label and is enabled by default. The four display screens enter screensaver mode when the main station has been inactive for 10 minutes.  
To enable or disable the screensaver:
1. In Menu mode, select Station Settings and then Display.
2. From the third menu (third display screen), select Screensaver.
3. From the fourth menu (fourth display screen), select either:
     • Enabled
     • Disabled
Note: The default is Enabled.
4. To enable (confirm) the selected setting, press the rotary control.  

HBP-2X screensaver activation:
The screensaver is displayed onscreen after 10 minutes of inactivity on the beltpack. To enable (or disable) the screensaver:
1. In Menu mode, press the left-hand Call Key and then select Display Settings.
2. Select Screensaver.
3. Select one of the following:
    • Enabled
    • Disabled
Note: The default is Enabled.
4. To enable (confirm) the selected setting, press the right-hand Call key
Note: The screensaver function on the HMS-4X base is independent of the screensaver function of each HBP-2X beltpacks on the powerline and each HBP-2X screensaver is independent of each other on the powerline.

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.