/
Matrix: Can I change the TCP/IP login port on a IVC-32 card

Matrix: Can I change the TCP/IP login port on a IVC-32 card

Apr 06, 2019
Translate page

With an IVC-32 card fitted into an Eclipse Omega / Median frame the user can connect Vseries panels over an IP network. By default the Vseries IP panels log into the IVC-32 using TCP/IP port 6001. (sometimes expressed as <ip address>:6001)
At ECS V5.2 the user could change the Login IP port number from the default of 6001
There are two changes required.1) At the matrix end using ECS go to the IVC-32 card properties and edit the IP port setting.After changing the IP port setting make a download with Red or Black Reset.
IVC-32 card settings 



























2) At the panel end go into IP setup and edit the Login port setting. if the login port is only 3 numbers then type in "0xxx"
Matrix event log messages following a change to the IP port to "443" 58,IVC32 Slot 3 IP Passcode set 59,IVC32 versions - app RELEASE_3.10.5.0  bootrom E-Que 1.4  FPGA 14 60,IVC32 Slot 3 DIP switches - OFF ON OFF OFF 61,IVC32 Slot 3 DIP switch 1 OFF - Watchdog enabled (version 1.3 bootrom onwards) 62,IVC32 Slot 3 DIP switch 2 ON - Full Duplex Ethernet enabled 63,IVC32 card in slot 3 has IP address 192.168.109.247 netmask 255.255.255.0 64,IVC32 Slot 3 voipPort set to 443 65,IVC32 Slot 3 Reading voipPort=443 66,IVC32 Slot 3 IP Passcode set 67,IVC32 versions - app RELEASE_3.10.5.0  bootrom E-Que 1.4  FPGA 14 68,E-Que/IVC32 card in slot 3 re-requested config - has reset? 69,IVC32 card in slot 3 has IP address 192.168.109.247 netmask 255.255.255.0 70,IVC32 Slot 3 Login listen port set to 443



CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.