Matrix: TEL-14 will not auto hangup - Set TEL-14 disconnect/hangup tone

2 min

In order for the TEL-14 to hang up the line when a call is finished, or if the line is taken off hook and then no action is taken, the TEL-14 needs to be able to recognize the off hook/disconnect tone.

Different regions use a different frequency tone in this situation and so the TEL-14 must be setup to listen for your region’s tones.

To change this, remove the TEL-14 front card carefully from the matrix and locate the set of dip switches labelled S7:

NOTE:

Use the printed labels on the circuit board as the switch numbers.
Please ignore those printed on the dip switches themselves.
The TEL-14 disconnect tone is set to North America by default.

Dip Switch Layout

Disconnect Tones Table & S7 Dip Switch Settings

Looking for labels? They can now be found in the details panel on the floating action bar.

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.