/
Matrix: Wiring diagram for Eclipse CCI-22 to MS-702 and RS-601 beltpacks

Matrix: Wiring diagram for Eclipse CCI-22 to MS-702 and RS-601 beltpacks

Question: What is the proper way to wire up an existing Encore party-line system to an Eclipse Median frame using a CCI-22 interface card. I have a MS-702 party-line main station by the Eclipse frame, I'm looking to wire up the CCI-22 card to the MS-702 main station, how is that accomplished?


Answer:  The CCI-22 rear card DB-9 connector on the Eclipse frame will tie into the rear panel  MS-702 A and B channel 3-pin XLR connectors. See the diagram below for the generic wiring scheme to link the Eclipse frame into the Encore Party-line system.

Figure 1: CCI-22 to MS-701 wiring diagram

 

The orange cables are standard CAT-5 or better cabling from the Eclipse MVX-A16 card to the rear interface card of the CCI-22. The cabling from the DB-9F connector to 3-pin XLR channels A and B on the MS-702 panel is a custom built cable. The DB9-M connector on the rear of the CCI-22 offers pins for both channels. The second DB9-M connector is wired in parallel to the first and is not used in our case. See the MS-702 user manual for the pin out on the 3-pin XLR connector. Standard 3-pin XLR microphone cable is used to connect the RS-601 beltpacks to the MS-702 main station.

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.