Wireless: Slow/Delayed button response on FreeSpeak/CellCom beltpacks
If the FSBP units are showing Slow/Delayed button response on FreeSpeak/CellCom beltpacks and the fault is independent of the Beltpack firmware.
Check the following a) Is the fault happening in one area - double check cable / splitter / antennas b) Re-set the EQUE (Clear-Com Eclipse matrices ) or Hi-Que card (Drake 4000 matrices)c) Make a Dect-sync survey for the system to make sure that the antenna compensation lengths are correct.
If ALL of the above fail then the beltpack(s) need to be returned for DECT recalibration.Please contact your local Clear-Com service center.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.