LQ V3.0.27 Network settings not responding normally using firmware 3.0.27
Problem:LQ V3.0.27 Network settings not responding normally - unable to set static IP Address / DHCP does not function properly
Solution:a) connect the LQ unit to LAN-network that has a DHCP server. The DHCP server will automatically assign an IP address to the LQ unit. After this the unit will work in both static and DHCP modes
b) Keep holding down the menu button after the normal menu screen appeared until another menu appears.
"There be dragons here"
It shows:Production TestTrace LevelsSSH Service
Select 'Production Test' then 'Start'After about a minute the networking options will work as expected.
You may have to re-enter the LQ front panel menu > admin> networking > edit > select DHCP > enabled mode
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.