/
Partyline: Can I loop the PL cable back to the PSU module?
Partyline: Can I loop the PL cable back to the PSU module?
One question on PLI have a installation were cable runs from PSU through some panels and back to the PSU. Is it ok to connect both end to the PSU?
Answer: Generalpractice is that you do NOT to cable back to the PSU, (as it will causedouble termination)
Answer: Generalpractice is that you do NOT to cable back to the PSU, (as it will causedouble termination)
, multiple selections available,
Related content
Partyline: Can I connect Encore Partyline product over CAT5 cable
Partyline: Can I connect Encore Partyline product over CAT5 cable
More like this
Matrix: E-32 and Eclipse-Pico frames: Do they use the same PSU assembly?
Matrix: E-32 and Eclipse-Pico frames: Do they use the same PSU assembly?
More like this
HXII-DPL Powerline Device-Frequently Asked Questions
HXII-DPL Powerline Device-Frequently Asked Questions
More like this
Encore: Can I power a RS-701 from a KB702GM
Encore: Can I power a RS-701 from a KB702GM
More like this
What are the spare part numbers for PSU modules for Clear-Com product
What are the spare part numbers for PSU modules for Clear-Com product
More like this
Cisco 9300
Cisco 9300
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.