Wireless: Can I interface a DX-121 system directly to an Eclipse Matrix frame port?
Question: I'm looking for a single beltpack wireless system that I can interface directly to my Eclipse Pico frame. Will the DX-121 allow for this type of 4-wire connection directly to a spare matrix frame port?
Answer: Yes the DX-121 will connect directly to a Matrix frame RJ-45 port via the rear panel 4-wire connector strip. Front panel manual adjustment controls are provided for in / out levels. A standard CAT-5 cable with one end cut off and the blue / green pairs wired to the DX-121 rear panel connector strip and then connected to the Eclipse matrix port will provide the necessary audio connections.
Answer: Yes the DX-121 will connect directly to a Matrix frame RJ-45 port via the rear panel 4-wire connector strip. Front panel manual adjustment controls are provided for in / out levels. A standard CAT-5 cable with one end cut off and the blue / green pairs wired to the DX-121 rear panel connector strip and then connected to the Eclipse matrix port will provide the necessary audio connections.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.