/
Wireless: Press ISO on the WH-210 is not sending audio to the AUX port on a DX210 basestation
Wireless: Press ISO on the WH-210 is not sending audio to the AUX port on a DX210 basestation
- Administrator
Owned by Administrator
Apr 06, 2019
If a WH-210 headset is not sending a audio signal out the AUX channel it is possible that the headset ISO has been locked out on that headset.
To re engage (assuming proper registration of headset is complete with base) power off the headset. Then press and hold the IC-1 and ISO button then power on the headset. Release the IC-1 and ISO buttons when the "POWER ON" indicator has occurred (you know that little voice that says "Power On"). The ISO mode should now be enabled.
To re engage (assuming proper registration of headset is complete with base) power off the headset. Then press and hold the IC-1 and ISO button then power on the headset. Release the IC-1 and ISO buttons when the "POWER ON" indicator has occurred (you know that little voice that says "Power On"). The ISO mode should now be enabled.
, multiple selections available,
Related content
Wireless: WH-210 not sending audio to AUX OUT via the ISO Button (DX210, DX-210)
Wireless: WH-210 not sending audio to AUX OUT via the ISO Button (DX210, DX-210)
More like this
Wireless: How to connect the audio between two DX210 basestations
Wireless: How to connect the audio between two DX210 basestations
More like this
Wireless: DX210 'ISO' button on packs not working.
Wireless: DX210 'ISO' button on packs not working.
More like this
Wireless: DX210 base station low / high / full frequency band setup
Wireless: DX210 base station low / high / full frequency band setup
More like this
Wireless: Is the DX210 basestation backward-compatible with WH200
Wireless: Is the DX210 basestation backward-compatible with WH200
More like this
Wireless: DX BP210 can hear through the headset when connected to the beltpac, but are unable to speak.
Wireless: DX BP210 can hear through the headset when connected to the beltpac, but are unable to speak.
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.