/
Partyline: How do I wire a YC-36 cable

Partyline: How do I wire a YC-36 cable

Apr 06, 2019

The YC-36 is a “Y adaptor” to breakout the 6PIN XLR (RS-602 Beltpack) to two 3pin XLR connectors
RS-602 Beltpack 6pin XLR Intercom inputPin 1 = GndPin 2 = VoltagePin 3 = Audio/Channel BPin 4 = Audio/Channel APin 5 = Local Program Input +Pin 6 = Local Program Input –(Pins 5 and 6 are not used in the YC-36 Y Adaptor)
Clear Com Intercom line 3Pin XLR pin outPin 1 = GndPin 2 = VoltagePin 3 = Audio

(Use shielded mic cable to make this adaptor) See attached 
1) Connect all Pin 1’s together2) Connect all Pin 2’s together3) Pin 3 of Channel A (3pin XLR Intercom line) goes to pin 4 of the 6pin XLR connector (RS-602)4) Pin 3 of Channel B (3pin XLR Intercom line) goes to pin 3 of the 6pin XLR connector (RS-602)Pins 5 and 6 of the 6pinXLR/RS-602 is not used in a YC-36

  File Modified

File YC-36 schematic.JPG YC-36 schematic.JPG

Apr 06, 2019 by Administrator

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.