/
Matrix: How do I create a global IFB? NOTE: this is for ECS matrix and not EHX newer than 8.5
Matrix: How do I create a global IFB? NOTE: this is for ECS matrix and not EHX newer than 8.5
By Administrator
Apr 06, 2019
Global IFB means that any panel on the system will be interrupting the fold back audio going out on the IFB port.
It's a 4 step process...
1. You need to enable the "Global IFB" on the "Advanced Settings" for the IFB port and set the dim level or cutting level.
2. Add the IFB label to the panel or panels that need to talk to the IFB destination
3. Route the audio to the IFB, for this, go to "Local advanced"->"Forced listen" and add a crosspoint from the PGM (source) port to the IFB destination port.
4. Do an "Apply changes to frame"
It's a 4 step process...
1. You need to enable the "Global IFB" on the "Advanced Settings" for the IFB port and set the dim level or cutting level.
2. Add the IFB label to the panel or panels that need to talk to the IFB destination
3. Route the audio to the IFB, for this, go to "Local advanced"->"Forced listen" and add a crosspoint from the PGM (source) port to the IFB destination port.
4. Do an "Apply changes to frame"
, multiple selections available,
Related content
Matrix: ECS / EHX Global IFB hardware and software setup with IFB-104
Matrix: ECS / EHX Global IFB hardware and software setup with IFB-104
More like this
Matrix: How do I create a IFB in ECS V5.2
Matrix: How do I create a IFB in ECS V5.2
More like this
Matrix: Can I select and route different IFB source audio from a matrix panel. Making your panel an ASSIGNMENT PANEL
Matrix: Can I select and route different IFB source audio from a matrix panel. Making your panel an ASSIGNMENT PANEL
More like this
Matrix: Monitoring an IFB destination from a V-Series panel
Matrix: Monitoring an IFB destination from a V-Series panel
More like this
Listen to Full composite IFB (Source and interrupt) on a matrix panel
Listen to Full composite IFB (Source and interrupt) on a matrix panel
More like this
Matrix: Can I monitor an IFB destination from a V-Series panel on a EHX v8.5.1 frame?
Matrix: Can I monitor an IFB destination from a V-Series panel on a EHX v8.5.1 frame?
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.