/
Matrix: How does the V-series panel headset PTT get configured in ECS

Matrix: How does the V-series panel headset PTT get configured in ECS

Translate page

V series panels with XLR-4 and XLR-5 headsets use an external wiring modification to give them PTT action via the headset detect circuitry. Therefore the panel headset detect circuitry is used to active the PTT function as programmed in ECS. In ECS this equates to the "Headset PTT Function" setting which should be used to determine PTT action with these headsets.
V series panels with XLR-7 headsets and/ or by using 2nd headset function wired to the auxiliary audio rear connector have a separate PTT1 and PTT2 pins that connect via ECS software to logic 1 and logic 2 inputs.Therefore for XLR-7 panels the PTT function is programmed in ECS using the logic 1 and 2 settings. 


 

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.