Matrix: Dante Controller crosspoint filters
In Dante Controller software the user can selectively filter transmitter and receiver devices in the routing tab. This allows
the user to map subscriptions on the grid map easier when many devices are present in the map.
For example if the user types in "con" in the transmitter field the user can isolate the transmitter field down to only show
the FOH-Console.
The same can be done with the receiver field.
the user to map subscriptions on the grid map easier when many devices are present in the map.
For example if the user types in "con" in the transmitter field the user can isolate the transmitter field down to only show
the FOH-Console.
The same can be done with the receiver field.
, multiple selections available, Use left or right arrow keys to navigate selected items
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.