Matrix: How do I monitor HCI messages to / from the matrix or VSM
- Administrator
Owned by Administrator
Apr 06, 2019
1 min read
Loading data...
HCI monitoring :
go to matrix event log > request info select custom
Enter 111 as the message code
For parameter 1, enter 1 (enable); 0 (disable)
The following will turn on HCI debugging in the rack. It will be quite verbose so will flood the event log but at least you will be able to see if the message is being sent from VSM
go to matrix event log > request info select custom
Enter 111 as the message code
For parameter 1, enter 1 (enable); 0 (disable)
The following will turn on HCI debugging in the rack. It will be quite verbose so will flood the event log but at least you will be able to see if the message is being sent from VSM
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.
We are looking for your help! Please consider sharing your stories, update an old solution or help us with a new one. Follow this link to share!