Matrix: What are the specifications / pinouts for the Eclipse Matrix frame GPIO relays?
The DB-25 connector labelled “GP OUT” allows connection to the Eclipse PiCo matrix’s eight double-pole double-throw (DPDT) relays with contact ratings of 30 Vdc at 1A. Each general-purpose output has a relay inside the Eclipse PiCo matrix. When a general-purpose output is inactive, the associated “common or wiper” pin on the GP OUT connector will be shorted to the relevant “normally closed” pin. When a general-purpose output becomes active, the short between the “common” pin and the “normally closed” pin is broken and a new connection is made between the “common” pin and the “normally open” pin.
Note: the pinout is the same for the frame relays on the Eclipse Median and Omega matrices
Pin-outs for the 8 GPO relays"
Pin-outs for the 8 GPI inputs
Related content
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.