/
Digital Partyline: Can I connect the HelixNet Fibre Interface Module: HLI-FBS to a Ethernet switch?

Digital Partyline: Can I connect the HelixNet Fibre Interface Module: HLI-FBS to a Ethernet switch?

Apr 06, 2019

The Helixnet fibre module HLI_FBS can be used in the following applications 
a) Connecting upto 3x Helixnet baestations together over fibre 
b) The HLI-FBS module can also connect to any Ethernet Switch with a SFP fibre port . This will allow the connection of Remote stations and Speaker Stations over longer distances than the normal 100m Ethernet limit . See attached sample connection diagram.
The HLI-FBS module contains two SFP cage slots. The module is supplied as standard with one transceiver fitted. Any 100BASE-X SFP can be connected.
Warning: Both ports are configured to bridge traffic from one port to the other in order to work in a daisy-chained configuration. Spanning Tree Protocol is not enabled on these ports, therefore do not connect them both to the same network.

  File Modified

PDF File HelixNet HLI-FBS to HRMnHKB.pdf HelixNet HLI-FBS to HRMnHKB.pdf

Apr 06, 2019 by Administrator

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.