/
HelixNet RJ45 to XLR Pinout:

HelixNet RJ45 to XLR Pinout:

HelixNet RJ-45 to XLR Pinout:
RJ45,       Color, XLR
Pin 1,       white/orange, Pin 1
Pin 2,       orange, Pin 1
Pin 3,       white/green, Pin 3
Pin 4,       blue, Pin 2
Pin 5,       white/blue, Pin 3
Pin 6,       green, Pin 2
Pin 7,       white/brown, Pin 3
Pin 8,       brown, Pin 2





XLR cable

CAT5/6 cable

XLR cable

CAT5/6 cable

Pin 1

Pin 1 and Pin 2

Pin 2

Pin 4, Pin 6 and Pin 8

Pin 3

Pin 3, Pin 5 and Pin 7

 















Wire the Cable Screen/Shield/Drain wire to pin 1 or XLR Shell. Pin 1 of the XLR is connected to the internal GND of the HelixnetNote: Cable Shield/Drain should be connected to XLR pin 1 for shield continuity. And that’s not only true for Cat5/Cat6, it’s also true for all twisted pairs as well.Note: Clear-Com recommends the use of shielded twisted pair cabling.

 

see also https://clear-com.atlassian.net/wiki/spaces/SF/pages/516554753

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.