/
Wireless: When I plug in the RTS line, my voice level in the Pro850 beltpac headset drops
Wireless: When I plug in the RTS line, my voice level in the Pro850 beltpac headset drops
- Administrator
Owned by Administrator
Apr 06, 2019
Two-wire intercom lines such as RTS-TW are designed to operate with a fixed 200-Ohm load. Any piece of equipment intended to operate on this line is balanced for that load impedance. If the PRO850 is operated with the two-wire interface active but unterminated, the interface is unbalanced and the side tone heard in the beltpac will be excessively high. When the two-wire line is plugged in to the base, the two-wire interface will be balanced and the level will drop to normal.
, multiple selections available,
Related content
Wireless: Cellcom base connected to Telex TR-300 beltpacks
Wireless: Cellcom base connected to Telex TR-300 beltpacks
More like this
Wireless: WBS-680 Why does the system go into feedback when I activate the talks on BPs?
Wireless: WBS-680 Why does the system go into feedback when I activate the talks on BPs?
More like this
Wireless: Which 2-wire Intercoms does the RW800 base station support?
Wireless: Which 2-wire Intercoms does the RW800 base station support?
More like this
Wireless: Configuring a WBS-670 system with a PTX-3 IFB transmitter and PRC-2 receivers
Wireless: Configuring a WBS-670 system with a PTX-3 IFB transmitter and PRC-2 receivers
More like this
Wireless: Can I use my 2.5mm connector headset with the HSI 6000 adaptor
Wireless: Can I use my 2.5mm connector headset with the HSI 6000 adaptor
More like this
Wireless: Does the headset connector RW800 base support dynamic/electret mics?
Wireless: Does the headset connector RW800 base support dynamic/electret mics?
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.