/
Wireless: Can I power the Tempest Base Station via an external DC input?

Wireless: Can I power the Tempest Base Station via an external DC input?

Apr 06, 2019

The Tempest 900 and 2400 Base Stations support external powering of the base via a DC source.  See below for specifications and DC connector type required.
DC Power Connection (Battery)
To power the Tempest Base Station from DC power you must provide an appropriate DC power input cable.
The DC power input jack on the Base Station is a Switchcraft 722RA.
The mating plug is a Switchcraft S760 - 2.1mm x 5.5mm power plug. The connector should be wired as center positive.
Always use appropriate wire of an acceptable gauge and length for your application. The minimum recommended wire is 26 gauge at not more than five feet. If 10 feet is required the minimum gauge would be 24.
Only use DC power from 11 to 32 Vdc. The Tempest Base Station will draw approximately 12 Watts (990mA at 12VDC).

See other solutions about Tempest basestation powering

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.