/
Matrix: How do I setup HS2 on a V-series panel
Matrix: How do I setup HS2 on a V-series panel
By Administrator
Apr 06, 2019
I want to use HS2 on the rear of my V-series panel
Use the wiring table below - use good quality headset cable, making sure that the mic cable has a separate shield from the other cables
or use one screened pair cable for the mic signals and another separate screened pair cable for the headset signalsThis means there are two cables wired into your connector.
Vpanel DB25 audio CC-95 (XLR4 connector ) Pin 1 HS 2 mic +ve Pin 2 Pin 14 HS 2 mic –ve Pin 1 Pin 15 HS 2 Left Ear Gnd Pin 3 Pin 2 HS 2 Left Ear Pin 4 You may need to make some changes also in the panel programming> audio mixer screenGo to ECS > Configuration > panel Select the panel > Audio mixer
Make sure to set the crosspoint between the HS2 and Matrix 1 ,Right button click on the crosspoint and select the 0db option Hopefully this should get you up and running
Use the wiring table below - use good quality headset cable, making sure that the mic cable has a separate shield from the other cables
or use one screened pair cable for the mic signals and another separate screened pair cable for the headset signalsThis means there are two cables wired into your connector.
Vpanel DB25 audio CC-95 (XLR4 connector ) Pin 1 HS 2 mic +ve Pin 2 Pin 14 HS 2 mic –ve Pin 1 Pin 15 HS 2 Left Ear Gnd Pin 3 Pin 2 HS 2 Left Ear Pin 4 You may need to make some changes also in the panel programming> audio mixer screenGo to ECS > Configuration > panel Select the panel > Audio mixer
Make sure to set the crosspoint between the HS2 and Matrix 1 ,Right button click on the crosspoint and select the 0db option Hopefully this should get you up and running
, multiple selections available,
Related content
Matrix: How should I wire up Headset 2 (HS2) on the rear of a V-series panel
Matrix: How should I wire up Headset 2 (HS2) on the rear of a V-series panel
More like this
Matrix: How should I wire up Headset 2 (HS2) on the rear of a V-series panel?
Matrix: How should I wire up Headset 2 (HS2) on the rear of a V-series panel?
More like this
Matrix: How do I wire the HS2 connection on the rear of a V series panel to a CC-95 headset
Matrix: How do I wire the HS2 connection on the rear of a V series panel to a CC-95 headset
More like this
Matrix: Does the V-Series panel support different headset mic types on HS 1 and HS 2 simultaneously?
Matrix: Does the V-Series panel support different headset mic types on HS 1 and HS 2 simultaneously?
More like this
Matrix: V-Series HS2 microphone not working at ECS V5.1.1
Matrix: V-Series HS2 microphone not working at ECS V5.1.1
More like this
Matrix: How do I setup a split ear feed to my V-series panel?
Matrix: How do I setup a split ear feed to my V-series panel?
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.