Matrix: Can I remotely trigger a relay using inward DTMF access codes on a Eclipse frame?

Owned by Administrator
Apr 06, 2019
1 min read
Question:  I want to remotely trigger an RLY-6 interface card relay using inward DTMF access codes on an Eclipse frame.
Is it possible to trigger a relay in this manner?
Answer:  Yes, frame, FOR-22 and RLY-6 relays can be access in this manner. 
1.  Create a control label and attach the desired relay or relays to the control
2.  Go to the Cards and Ports screen, select the TEL-14 interface card and look for DTMF settings in the advanced settings column
3.  Select "Assign DTMF codes"  click to assign to open the inward DTMF assign screen, assign the control labels with relay attachments to a one or two digit code talk or listen box
4.  Close the DTMF assignment screen, apply changes to frame
5.  Dial in to frame, after hearing the access prompt enable the one or two digit code, the relay should activate, to deactivate the relay enter 99 on the phone keypad

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.