/
Wireless: How do I interface between Tempest and Helixnet using 4-Wire
Wireless: How do I interface between Tempest and Helixnet using 4-Wire
By Administrator
Apr 06, 2019
Question: Can you please assist me in resolving this issuewhich i am facing from the last few weeks regarding the 4-Wire interfacebetween Tempest and Helixnet.As per the instructions given in the Manuals ofboth system i am using 4-Wire Cross Over cable which is the same one using toconnect Eclipse frame with PC.The Cable is fine plus all the steps given inmanuals are rightly followed by me still the connection is not establishing.Please guide me through this and if you can sendme the info about steps which need to be followed, it will be more convenientfor me.
Answer: The Cable which isused for communication between Eclipse and PC is a Ethernet Crossover Cable.This will not work for 4-wire connections.
You will need a cable like this: (crossed Audio Pins) .
Note: This special AUDIO cross over cable is the can also be used for connecting A Helixnet basestation to FreeSpeak/ CellCom basestationA Helixnet basestation to DX200 or DX210 wireless basestation
If connecting a Helixnet basestation to an Eclipse Matrix then use a straight CAT5 1:1 cable
Answer: The Cable which isused for communication between Eclipse and PC is a Ethernet Crossover Cable.This will not work for 4-wire connections.
You will need a cable like this: (crossed Audio Pins) .
Note: This special AUDIO cross over cable is the can also be used for connecting A Helixnet basestation to FreeSpeak/ CellCom basestationA Helixnet basestation to DX200 or DX210 wireless basestation
If connecting a Helixnet basestation to an Eclipse Matrix then use a straight CAT5 1:1 cable
, multiple selections available,
Related content
Digital Partyline: How do I connect Tempest to the HelixNet HMS-4X base station?
Digital Partyline: How do I connect Tempest to the HelixNet HMS-4X base station?
More like this
Wireless: Tempest Base Station 4-wire pinouts (verified)
Wireless: Tempest Base Station 4-wire pinouts (verified)
More like this
HelixNet: How do I make a physical connection to a CellCom Base 4-wire port from HelixNet?
HelixNet: How do I make a physical connection to a CellCom Base 4-wire port from HelixNet?
More like this
HelixNet: How do I make a physical connection to a DX-210 4-wire port from HelixNet basestation?
HelixNet: How do I make a physical connection to a DX-210 4-wire port from HelixNet basestation?
More like this
HelixNet: How do I make a physical connection to a WBS-680 / WBS-670 4-wire port from HelixNet?
HelixNet: How do I make a physical connection to a WBS-680 / WBS-670 4-wire port from HelixNet?
More like this
HelixNet: Connecting Helixnet Base to DX210 Wireless Base via 4-wire
HelixNet: Connecting Helixnet Base to DX210 Wireless Base via 4-wire
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.