/
IP: Voice 2 upgrade from version 2.0.5 to version 2.1.0 fixes

IP: Voice 2 upgrade from version 2.0.5 to version 2.1.0 fixes

Apr 06, 2019

Note:  Release solution when Voice 2.1.0 is officially released!
Voice 2 interface firmware upgrade to version 2.1.0 fixes the following issues with version 2.0.5 firmware:

  • Parameters not reported correctly when enabling / disabling DHCP.  Parameters were not reported correctly when enabling and disabling DHCP.  This issue has now been resolved.

  • DHCP parameters not taking effect on cable reconnection on LAN1.  DHCP parameters will now take effect on cable reconnection on LAN1, however long it takes for the DHCP server to issue a new lease.

  • Speex instability at 32kHz.  There was an instability issue with Speex at 32kHz that caused units to lock up. This issue has now been resolved.

  • There was an issue with the Speex ABR and VBR codec. This issue has now been resolved.

  • There was an issue with new configuration parameters not saving (and not taking effect). This issue has now been resolved.

  • Improvements have been made to echo cancellation.

  • Traces and trace levels have been reformatted to make them more readable and usable.

  • The default timeout has been set to 7 seconds.

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.