/
Wireless: Why Don't my FSII BP belt packs appear to register with the USB cable on my FSII-base2 when there is no antenna connected? They don't appear in the CCM either.

Wireless: Why Don't my FSII BP belt packs appear to register with the USB cable on my FSII-base2 when there is no antenna connected? They don't appear in the CCM either.

Apr 06, 2019
Translate page

Actually your belt pack has registered but will continue to say searching until an Antenna is connected. You may continue to register all belt packs. The best way to be sure that the belt pack has registered is to watch the status line across the bottom of the 4 windows on the base. Once an antenna(s) is connected and belt packs are powered on they will connect and appear in the CCM.

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.