IP Products: What specific settings are available to the LQ-4WG2 interface?
The LQ-4WG2 / LQ-R4WG8 / LQ-R2W4+4WG4 interfaces have some user specific settings that can be accessed
via the CCM web browser screen. These settings are:
4-wire + GPIO specific settings
Selecting Mic Level allows for extra noise on the line to be attenuated. This setting works in conjunction with the
Output Gain; overall gain = Output Level + Output Gain.
GPIO action triggers (4-wire + GPIO and IVC-32 ports)
via the CCM web browser screen. These settings are:
4-wire + GPIO specific settings
- Output level: Mic Level (-55db)/Line Level (0 dB).
Selecting Mic Level allows for extra noise on the line to be attenuated. This setting works in conjunction with the
Output Gain; overall gain = Output Level + Output Gain.
GPIO action triggers (4-wire + GPIO and IVC-32 ports)
- GPI action trigger: Disabled/Channel Event 1/Channel Event 2/Channel Call Event (assign a Channel Logic Event on detection of a GPI signal).
- GPO action trigger: Disabled/Channel Event 1/Channel Event 2/Channel Call Event (assign which Channel Logic Event triggers the GPO).
- GPO Off Delay: None to 2 seconds. This sets a delay on the deactivation of the GPO after a Channel Event has disappeared.
- Test: use to check that the GPO is firing (hardware).
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.