Concert: Can I connect my Concert Server to a Recorder and Radio interfaces
For the Concert Server system, Is there any way to connect the System to a Recorder and a Radios Interface. For this they have to use a matrix frame or other then that some other way it can be done ?
If you get the Concert-Server-4W, it comes with 8x 4-wire connections via a soundcard
(search for solution: IP Concert: Does Clear-Com provide a "Pre Built" Concert Server PC?).
This could be used to interface with a recorder. The radios would only work if they were in constant transmit (half-duplex) or can be triggered by VOX as there’s no PTT function.
Alternatively: Yes you could loop the Concert server 4wires into a Matrix and then connect the matrix 4wire + GPIO ports to the radio if you need PTT
If you get the Concert-Server-4W, it comes with 8x 4-wire connections via a soundcard
(search for solution: IP Concert: Does Clear-Com provide a "Pre Built" Concert Server PC?).
This could be used to interface with a recorder. The radios would only work if they were in constant transmit (half-duplex) or can be triggered by VOX as there’s no PTT function.
Alternatively: Yes you could loop the Concert server 4wires into a Matrix and then connect the matrix 4wire + GPIO ports to the radio if you need PTT
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.