Broaman: How to quickly check if your MUX-22 is working
To do that please follow the instructions:
Connect COM port only locally on single device using simplex fiber cable - this will create internal loopback for all video channels and channel 1 will appear on output 5, channel 2 on output 6 and so on.
Please do the same for each device.
This will allow us to see which device has a problem and if it's a problem with transmitter or receiver.
Only loopback the Com 1 port as shown in the panel diagram below.
Related content
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.