/
Wireless: Can I update the PD2203 splitter firmware via OTA or USB on a FS II base station system?

Wireless: Can I update the PD2203 splitter firmware via OTA or USB on a FS II base station system?

By Administrator
Apr 06, 2019
Question:  I'm in the process of upgrading a CellCom base station system to Freepeak II system, I understand the system components are upgradeable via USB or Over The Air (OTA) methods.  Does this include the PD2203 antenna splitter firmware? 
Answer:  The following components will upgrade using USB / OTA upgrade method:
  • FS II beltpack
  • FS II transceiver antenna
The Base Station is upgradeable via ethernet or serial comms port
The PD2203 splitter module is only upgradeable via serial port comms using Flash Delevopment Toolkit software.  
Note:  PD2203 splitters built prior to September 2014 will need a hardware upgrade in order to work properly with
Freespeak II Eclipse EHX 7.6 or higher systems and with Freespeak II base station systems.  Please contact the
Clear-Com Service Department Group if you have questions.  

Related content

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.