Wireless: FS II configuration editor screen basic functions

Owned by Administrator
Apr 06, 2019
1 min read
There are six tabs at the top of the Configuration Editor screen that control the FS II programming functionality:
  • Beltpacks – Allows you to register and unregister beltpacks, set beltpack properties and assign beltpack keys.
  • Ports – Allows you to configure 2-wire ports, 4-wire ports, program in, stage announce, headset 1 and 2
  • Groups/WPL – Allows to create and edit up to 5 fixed groups and up to 5 wireless party-line groups.
  • Antennas – Allows you to set cable lengths for connected FS II transceiver antennas
  • IFB – Allows you to configure IFBs.
  • System – Allows you to configure system parameters such as system IP address, pin numbers and access codes.






























There are five buttons at the bottom of the Configuration Editor screen:
  • Diagnostics – Opens the FS II Diagnostics Tool. Allows you to view the current state of the Base station, including beltpack and transceiver antenna status and the Base station event log.
  • Help - Opens the online help for the Configuration Editor
  • Clear Map - Clears the current file from the Configuration Editor buffer. All the parameters set in the editor will be reset to the startup defaults.
  • Send File - Sends a firmware file (normally a 4kr file) to the Base station.  
Can also be used to send the FSII base FPGA file and or FSII BP and antenna firmware.
  • Exit - Exits the Configuration Editor. If a file has been changed or retrieved from the Base station and not saved, you are prompted to save the file before exiting the editor.

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.