/
Wireless: What are the tones used on the FSII BP

Wireless: What are the tones used on the FSII BP

Apr 06, 2019

This solution is dated Feb-2015 
Tones on the FSII BP  are generated on differentevents.  Some events are generated at theMatrix and sent to the BP and other events are createdlocally by the user changing the state of the rotary encoders or pressingbuttons

EVENT TONE Description General Purpose Beep   Mid Beep (Gen. 2) General tone from matrix     Call Signal   Mid Beep & High Beep (Gen. 1) Based on FreeSpeak mk1, Mid on 200ms Mid off 0ms High on 200ms High off 400ms Repeat if key held Low Battery   High Beep (Gen. 2) On(400ms) Off(100ms)  On(100ms) Off 1 minute Out Of Range    High Beep (Gen. 2) On(400ms) Off(100ms) On(100ms) Off(100ms) Rotary   Low Beep (Gen. 2) On(100ms) Off(100ms)  in relative volume to the Volume bar Menu Button   Low Beep Mid Beep High Beep (Gen. 2) Low on 100ms Low off Mid on 100ms Mid off High on 100ms High off   Only triggers on entering menu Power Button   Low Beep Mid Beep High Beep (Gen. 2)  Repeatedly Sound whilst Power Button held.  High on 100ms High Off Mid on 100ms Mid off Low on 100ms Low off 300ms Listen Again Start/Break Low Beep On 100ms Off 100ms Listen Again End Low Beep On 100ms Off 100ms On 300ms Sync Mode – All RFPs seen    Low on 100ms Low off High on 100ms High off Mid on 100ms Mid off Mid on 100ms Mid off Menu Select (D key)   High on 100ms High off Menu Cancel (C key or Menu Exit)   Low on 100ms Low off


Where:-  High Beep = 1.760kHz, Sinusoid,Starting and Ending at 0 Degrees to avoid clicks.  Mid Beep = 880Hz, Sinusoid,Starting and Ending at 0 Degrees to avoid clicks.  Low Beep = 440Hz, Sinusoid,Starting and Ending at 0 Degrees to avoid clicks. 

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.